All posts by Ken Blair

A rainwater collection systems designer and consultant, Ken has designed and installed residential and commercial systems, primarily in the northwest United States for more than 10 years and, in 2014, began consulting and managing builds in other states. Ken is an accredited ARCSA Professional Designer / Installer and Life Member, the Northwest Regional ARCSA representative and advisor to its education committee and is available to speak about Rainwater Collection Systems design and builds. Ken is a United States Navy veteran, having served on active duty during the Vietnam War era. A career entrepreneur, Ken created a new business focus with a commercial dive company in Hawaii in the mid 1980′s to respond to and clean up oil spills, oil spill equipment training, service and maintenance for the oil co-op service industry. Ken is passionate about having a positive impact on the environment and is also a founding director of BANK-ON-RAIN (2011-2014), whose mission is to create grassroots solutions for rainwater collection for consumption and agriculture in developing areas of the planet.

Is Rainwater Safe to Drink? What About Bird Poop?

RBRWC924155As an American Rainwater Catchment Systems Association (ARCSA) Accredited Professional and Inspector Specialist, I’m often asked,

“Is rainwater catchment water safe to drink? What about the bird poop?”

Which usually evokes my typical response “Certainly it is, with proper storage, filtration and ultraviolet disinfection (UV), your quality of water will more than likely exceed the quality of municipal and well water sources.” Rainwater is relatively clean to start with; it is what it comes in contact with, how it is stored, and how it is treated which determines its quality.

Wells, lakes, and rivers are the most common source of our municipal water supplies. “It’s the same bird that just pooped on my roof that just flew over the lake”, I exclaim, “and as for droppings questions about deer, raccoon, geese, and every other forest animal out there – I have yet to see a deer or goose on my roof.” I often am rewarded with an ever so slight chuckle, but it does get the attention of and makes sense to my new rainwater collection advocate.

Municipal, well, and private rooftop collection must address coliform and bacteria. Municipal water sources typically use chlorination and ultraviolet disinfection to achieve an expectable level set by the EPA. Well water that exceeds allowed bacteria and coliform levels are usually condemned.

Properly collected rainwater has relatively low levels of bacteria and coliform, lending itself to simple disinfection with ultraviolet light exposure. Advances in small ultraviolet light systems, designed and tested for household use, have made potable household use of collected rain virtually free of bacteria and coliform. Of course, filtration prior to disinfection needs to be addressed by municipal, private well, and private roof top collected water. Most private rainwater catchment systems mimic municipal water filtration techniques with sediment and carbon absorption filters, followed by disinfection. Unlike well water, there is never a concern with rainwater catchment for iron, hardness, salinity, or other constituents that would require additional filtration.

file0002019685404Any source of water, whether municipal, well, or rooftop collection, must be properly maintained and monitored. Private well maintenance is typically conducted by the owner – consisting of filtration changes as needed, and testing -being conducted at time of commissioning, or as a disclosure during the property sale. Municipal water sources are maintained and monitored by trained personnel, but allow for higher levels of constituents than a properly designed, constructed, and maintained rainwater catchment system. Once again, rooftop collected water is relatively clean to begin with, therefore requires a less aggressive approach to filtration and disinfection than that of a well or municipal water source. The homeowner easily maintains a rainwater collection system with periodic filtration changes, annual testing and simple monitoring. You become the purveyor of your water source; you are in charge, not leaving it to others.

With careful consideration of materials, techniques, and maintenance, rainwater is most certainly a viable source of clean, safe to drink, water.

RainBank Rainwater Harvesting Systems in Seattle

SeaScoutBase_Galveston_RainBank_projectRainBank Rainwater Systems of Seattle is an ARCSA accredited designer, consultant, and installer of rainwater harvesting systems for both potable, and non-potable demands. Commercial and residential systems are designed and constructed to meet our customers’ specific needs.

RainBank will design, install and package systems from 2,500 gallons to 50,000 gallons.

RainBank’s customers are

  • Eco-friendly homeowners seeking to add rainwater collection or integrate into plans for a new premium or custom built residence
  • Architects developing plans for premium residential projects
  • High-end building contractors specializing in custom builds
  • Commercial contractors where rainwater harvesting is a component to the scope of the project

RainBank provides customers with an integrated, progressive and modern approach to sustainable, premium water systems.

RAINBANK SERVICES INCLUDE:

DESIGN: complete systems with performance specifications.

ENGINEERING & PERMITTING: to meet all legal requirements from county and state agencies; cost effective, faRBRWC917152st & hassle free.

INSTALLATION: includes onsite management & the “soup to nuts” installation of rainwater harvesting and storage systems.

PRODUCTS:  A rainwater system designed with WISY products requires minimal maintenance and never needs replacing.  Never clean a filter basket or a tank again.  Ever.  (Come back often; we’re adding new product lines for 2016!)

CONSULTING : is available throughout the US Including Hawaii, for all rainwater harvesting & Class B water systems.

PACKAGING: Customized kits & blueprints for do-it-your-selfers, those in remote locations, tract housing developers and large companies. Use the form below to contact us about customized kits or other services.

Are You Collecting Winter Rain for Next Summer?

waterAccording to some predictions, this winter the Seattle area will continue with warmer than typical temperatures. Essentially we could have a repeat of last winter with not much snowpack towards the end of winter. The good news is – we are getting above average of rainfall this December and the trend is expected to follow  throughout the winter.

“There’s a 90 percent chance El Niño will continue through this winter and a 80 percent chance it will extend to early spring 2016″, the National Weather Service’s Climate Center reported.

Rich Marriott, King 5 meteorologist, said “The likelihood of warmer than normal temperatures for the Pacific Northwest. It also means less precipitation but not necessarily less rainfall.”

buried tankWe stand a good chance of seeing a lot of the snow pack disappear before early spring, which puts us in a possible drought condition again next summer.

Collection systems for RainBank customers in Seattle and outlying areas are almost full with some overflowing, thanks to the recent record rainfall. There is enough rainfall that they will be able to continue using their rainwater for domestic use and, more than likely, will go into spring with enough water to last through the summer. 

Last summer, some water districts experienced shortages and were forced to buy water from larger districts. Those who have a sustainable rainwater collection system designed and installed by RainBank Rainwater Systems will be more prepared for these shortages with stored water. tank on truckMost of our designed/installed systems in the Seattle area are supplemental to city water, allowing storage of the collected rain for those times when most needed. 

Are you ready for another long dry summer? There is still time. Contact RainBank Rainwater Systems for a free consultation.