Category Archives: Rainwater Catchment

Rainwater Catchment

ARCSA Endorses Rainwater Harvesting Legislation

waterfallThe nonprofit rainwater harvesting industry association, The American Rainwater Catchment Systems Association (ARCSA) strongly supports legislation with an eye toward helping communities better prepare for the future by providing new incentives and investments to help residents, businesses and local water agencies conserve, recycle and manage limited water supplies.

ARCSA president, David Crawford has asked Congress to support rainwater harvesting by passing two bills in the House and Senate, introduced by Senators Barbara Boxer and Dianne Feinstein, along with Reps. Grace Napolitano and Peter DeFazio.

In his letter, dated December 7, 2014, Crawford states:  “ARCSA strongly supports legislation in the U.S. Senate and the House of Representatives that aims to help communities nationwide better prepare for the future by providing new incentives and investments to help residents, businesses and local water agencies conserve, recycle and manage limited water supplies. Introduced in the Senate (S. 2771) by Senators Barbara Boxer (D-CA) and Dianne Feinstein (D-CA), and in the House (H.R. 5363) by Reps. Grace Napolitano (D-CA) and Peter DeFazio (D-OR), “W21: Water in the 21st Century” would expand rebates and grants for water conservation and efficiency; support local investments in water recycling and improved groundwater and storage; invest in research into water-saving technologies and desalination; and establish an open water data system. The measure also would seek to help local communities take steps to become better prepared for drought.”

Please click here to read the full article on ARCSA’s position and learn why it is important, not just for improved water conservation, but also to foster economic development through the creation of new jobs associated to rainwater harvesting industry development.

Rainwater Catchment, Rainwater Harvesting Education

Managing Drought with Conservation Techniques

Could the recent storm in California have put a dent in the drought?

slimline tanksWe can’t change the weather, but we can make better use of it.

With a reported 2 – 4 inches of rainfall in Los Angeles county and 4 to 5 inches in San Diego county from this recent winter storm, widespread flooding was what we heard about on the news. News station weather centers were quoted as saying, “While the rains in California have been generous, they are far from enough to put a dent in the drought.” Since 80% of California is experiencing drought, while this record rainfall caused some flooding and damage, it was also an opportunity to see how we can apply conservation techniques to harness water for toilet flushing and laundry facilities.

For an average 3,500 square foot home in San Diego, four inches of rainfall could have collected approximately 7,500 gallons of water. In Los Angeles with only 1.5” of rainfall, the same house could have collected 2,780 gallons. If this hypothetical 35,000 square foot home collected, stored and used this rain from this single event, merely for toilet flushing, it would equal over 2,225 flushes or approximately 10 flushes per day for the whole year. Applying the same scenario to the San Diego house could mean the same 10 flushes per day PLUS 168 loads of laundry per year! Imagine how much water could be collected if a commercial building, with its larger roof space was to apply this practice.

Drought can be managed if the right conservation techniques are applied.

Photo: Ray Chavez/Bay Area New Group

Rainwater Catchment, Technical Information

Should You Use an External or Submersible Pump in Your Rainwater Collection System?

1 Comment

submersible-pumpAs mentioned in a previous post, centrifugal pumps are the most common type used in rainwater collection. Sizing of the pump is essential in finding the right pump to meet the needs for which the system was designed. A water cooled centrifugal pump is recommended for potable application. Friction, static head, lift,PSI, and GPM are factors that need to be considered in sizing your pump. Pumps are either submersible or external, and depending on the application, one could be better suited than the other.

Sump tanks are generally smaller than the cistern and their purpose is to convey water collected from the roof to a central collection tank, then pumped to storage. A submersible pump with a float switch is best suited for this application. As the sump tank becomes full of collected water from the down spouts, the float switch turns the pump on to transfer water to storage. When the water level in the sump drops the float switch to the down position, the pump turns off. Submersible pumps for this application “MUST” be water cooled. The use of an oil cooled submersible pump is not considered NSF for potable use. The water cooled, submersible centrifugal pump needs to lift to the top of the cistern, whether the plumbing is external or internal. A larger pump will be required if the pump is not able to meet the lift requirements. Unlike external centrifugal pumps, which need to be primed and maintain that prime during and after pump cycle, submersible pumps, if completely submerged, will maintain a constant prime for operation.

Submersible pumps can be 120 or 220 volt and can be AC or DC. Solar power with battery backup can be used for sump pumps allowing an “off grid” application. Care must be taken to insure that the pump’s electrical needs are met from the power supply in order to protect the pump from damage.

External centrifugal pumps are generally used to transfer collected water from storage (cisterns) to use. This can be a “on demand” booster pump or a dynamic pump with control of suction flow to a pressure tank. A booster pump needs to be primed before operation and able to maintain that prime after the pump shuts off. With an external centrifugal pump, suction lift is limited. This type of pump should not be higher than the stored water low level, allowing head pressure to feed the pump, rather than the pump pulling water up to its level. AC, DC, or solar can be used for pouring the pump. This style of pump is generally water, air cooled and should be protected from freezing.

Whether you are looking into a submersible or a external pump, centrifugal pumps offer a wide range of horse power, GPM and PSI. Sizing your pump will determine its efficiency and longevity.