Planning a Rainwater Collection System

Steel Tank Residential_watermarkedWhen planning a rainwater collection system, consideration of annual, monthly, intensity and frequency of rainfall must be taken into account. Precipitation information is generally available by most counties, state climatologists, the National Oceanographic and Atmospheric, Administration (NOAA) and the National Climatic Data Center.

Rainfall amounts in a given location can vary from month to month as well as intensity and frequency. Precipitation reports typically include snow as well as rainfall amounts. A history of rainfall amounts with consideration of a 50 or even a 100 year event are often required by the permitting agency to control overflow and runoff.

Rainfall intensity is measured in inches of rain per hour (IPH). Rainfall intensity will determine the choice of collection components and storage amounts. Although “first flush devices” are widely promoted by permitting agencies and some designers, they may not be the best option. If a given location has a low IPH, a first flush device may not be the best method of pre filtration upstream of storage.

Rainfall frequency can be obtained by a local climatologist and taken into consideration of storage and conveyance. Frequency of rainfall for a given area will help determine storage, as well as pipe size used for conveyance.

Rainfall return period is the historical data of a rainfall in a given location. While not a representation a specific time period, a return period determines the probability of an equal event in a given time. In other words an event of a 2-year return period has a 50% chance of occurring in any 1 year period.

Lastly, a maximum amount of dry days is critical in the design of a successful rainwater collection system. An historical account of dry periods is essential in determining storage capacities to get through the dry months.

Careful review of local rainfall data in determining size of storage, conveyance, and components is essential in a successful rainwater collection system.

Ken Blair
A rainwater collection systems designer and consultant, Ken has designed and installed residential and commercial systems, primarily in the northwest United States for more than 10 years and, in 2014, began consulting and managing builds in other states. Ken is an accredited ARCSA Professional Designer / Installer and Life Member, the Northwest Regional ARCSA representative and advisor to its education committee and is available to speak about Rainwater Collection Systems design and builds.

Ken is a United States Navy veteran, having served on active duty during the Vietnam War era.

A career entrepreneur, Ken created a new business focus with a commercial dive company in Hawaii in the mid 1980′s to respond to and clean up oil spills, oil spill equipment training, service and maintenance for the oil co-op service industry. Ken is passionate about having a positive impact on the environment and is also a founding director of BANK-ON-RAIN (2011-2014), whose mission is to create grassroots solutions for rainwater collection for consumption and agriculture in developing areas of the planet.

One thought on “Planning a Rainwater Collection System”

Comments are closed.