How To Benefit from Rainwater Collection in a Rural Area

HOW TO BENEFIT FROM RAINWATER COLLECTION IN A RURAL AREAMany King County rural homeowners and farms are finding that rainwater collection as supplementary to their wells or community water systems is helpful in limiting overuse of their water supply.

If you are in a water district or community water association, there are cost increases when you reach a certain level of use. Those who are on a lower producing well may find that supplementation maybe the answer for lower water volume or even salt water intrusion. Adding a rainwater collection system can lessen the demand on both.

With more space than an urban building lot, larger storage can be the answer to your water needs. Large grain bin, steel tanks can store as much water as you may need. It is common for rural applications to have 10,000 to 50,000 gallons or more of storage. Irrigation, livestock watering, equipment wash down and even whole house use can be achieved with rainwater collection.

Rainwater starts off relatively cleaner than surface water. With simple filtration, non potable applications can be the answer to digging a new or additional wells. With proper filtration and disinfection for potable use, water quality can exceed that of wells or community water without the added chlorine. Large roof areas found on farms can supply enough water for dairies, livestock and domestic use. A study of average rainfall and roof area can guarantee the amount of water you can collect.


How To Benefit from Rainwater Collection in a Rural AreaThe return on investment of a rainwater harvesting system for a farm can be as little as 3 years, saving thousands per year on water costs.

For the rural homeowner with large landscaping, water demand can be expensive. A larger cistern as a supplementary source can save money on your monthly bill from the water district. Whether your needs are large or small for water use you can benefit from rainwater collection in a rural application.

Ken Blair
A rainwater collection systems designer and consultant, Ken has designed and installed residential and commercial systems, primarily in the northwest United States for more than 10 years and, in 2014, began consulting and managing builds in other states. Ken is an accredited ARCSA Professional Designer / Installer and Life Member, the Northwest Regional ARCSA representative and advisor to its education committee and is available to speak about Rainwater Collection Systems design and builds.

Ken is a United States Navy veteran, having served on active duty during the Vietnam War era. He attained the rate of E-4 Machinist Mate.

A career entrepreneur, Ken created a new business focus with a commercial dive company in Hawaii in the mid 1980′s to respond to and clean up oil spills, oil spill equipment training, service and maintenance for the oil co-op service industry. Ken is passionate about having a positive impact on the environment and is also a founding director of BANK-ON-RAIN (2011-2014), whose mission is to create grassroots solutions for rainwater collection for consumption and agriculture in developing areas of the planet.

Leave a Reply

Your email address will not be published. Required fields are marked *