Is Rainwater Clean and Safe to Drink?

clear-water-glass_smRainwater is generally considered clean to begin with, however, water is an excellent medium for growth and transport of disease causing organisms.

The good news is rainwater is relatively easy to filter and disinfect, and disinfected rainwater may significantly improve drinking water supplies.

The clean water act of 1974 and recent amendments have enhanced the protection of drinking water. But, news bulletins throughout the United States of contaminated municipal supplies have spawned an increased interest in rainwater harvesting as a source of drinking water. People are looking toward alternatives to an aging, overwhelmed infrastructure to provide a safe, clean source of drinking water for the household and family.

Water quality problems associated with rainwater harvesting systems most often originate in the catchment area, conveyance system, or storage components caused by:

  • System was poorly maintained
  • Collected water was not properly disinfected
  • Conveyance and storage were poorly designed
  • Simple measures were not taken to ensure the quality of the water

All harvested rainwater that is intended for potable use must be treated effectively to minimize the risk of harming human health. To ensure a RWH system is producing high quality water, proper techniques in design, construction and maintenance along with testing need to be conducted.

Recent plumbing codes set by the American National Standards Institute (ANSI) and American Society of Plumbing Engineers (ASPE) along with the American Rainwater Catchment Systems Association (ARCSA) have been adopted at the national level and must be adhered to by designers and contractors installing rainwater collection systems meant for potable and non potable use. 

Rainwater harvesting can be a safe, reliable source of drinking water if codes and practices are conducted. Ask if your designer and installer are ARCSA Accredited Professionals and are up to date on the latest plumbing codes. 

Ken Blair
A rainwater collection systems designer and consultant, Ken has designed and installed residential and commercial systems, primarily in the northwest United States for more than 10 years and, in 2014, began consulting and managing builds in other states. Ken is an accredited ARCSA Professional Designer / Installer and Life Member, the Northwest Regional ARCSA representative and advisor to its education committee and is available to speak about Rainwater Collection Systems design and builds.

Ken is a United States Navy veteran, having served on active duty during the Vietnam War era.

A career entrepreneur, Ken created a new business focus with a commercial dive company in Hawaii in the mid 1980′s to respond to and clean up oil spills, oil spill equipment training, service and maintenance for the oil co-op service industry. Ken is passionate about having a positive impact on the environment and is also a founding director of BANK-ON-RAIN (2011-2014), whose mission is to create grassroots solutions for rainwater collection for consumption and agriculture in developing areas of the planet.