Is Drinking Rainwater Bad for Us?

water-686917_640Although rainwater is generally considered clean, it can carry microbial and viral contamination generally caused by birds, rodents and insects. However, rainwater is relatively easy to filtrate and disinfect, resulting in improved quality over other drinking water supplies.

The Environmental Protection Agency (EPA) regulates the quality of public drinking water, but not private systems. The treatment of rainwater should be equal to that of surface water. All collected rainwater used for potable supply must be treated effectively to minimize risk of human health hazards. Contaminates need to be removed by filtration and sorption, or inactivated by disinfectant.

Both organic and inorganic contaminants need to be considered in design and installation of a rainwater collection system. Microbial and viral contamination in a rainwater collection system can be reduced by proper collection techniques such as screening, first flush devices, or vortex filters before storage. Environmental contaminants such as pesticides, fertilizers, and hydrocarbons should be considered, too. Raw water testing from the downspout at time of design will insure proper filtration in the treatment train, if needed.

Raw water should be tested to ensure that a RWC system is designed to produce high-quality potable water and tested after installation to be sure that the filtration and disinfection system is effectively removing any contaminants of concern.

To ensure that a RWC system is producing high-quality water, testing must be done. The EPA and local health agencies specify methods to analyze drinking water. Laboratories that conduct these tests are certified and governed by regulatory agencies. It is recommended that collected rainwater intended for single family domestic use be tested once per year for bacterial and any other constituents that are a concern.

Ken Blair
A rainwater collection systems designer and consultant, Ken has designed and installed residential and commercial systems, primarily in the northwest United States for more than 10 years and, in 2014, began consulting and managing builds in other states. Ken is an accredited ARCSA Professional Designer / Installer and Life Member, the Northwest Regional ARCSA representative and advisor to its education committee and is available to speak about Rainwater Collection Systems design and builds.

Ken is a United States Navy veteran, having served on active duty during the Vietnam War era.

A career entrepreneur, Ken created a new business focus with a commercial dive company in Hawaii in the mid 1980′s to respond to and clean up oil spills, oil spill equipment training, service and maintenance for the oil co-op service industry. Ken is passionate about having a positive impact on the environment and is also a founding director of BANK-ON-RAIN (2011-2014), whose mission is to create grassroots solutions for rainwater collection for consumption and agriculture in developing areas of the planet.